This article mainly introduces:

Uruguay hydraulic cylinder,swager cylinder manufacturer,swager cylinder

(Uruguay swager cylinder,produced by Hengyu Hydraulic Cylinder Factory）

swager cylinder are widely used in Uruguay，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed swager cylinder for customers from Uruguay.

Introduction to swager cylinder:

swager cylinder piston rod material introduction: In general, we use 45 steel to produce swager cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

The swager cylinder should be used correctly and maintained regularly. The swager cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the swager cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

The viscosity of the working oil used in the swager cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

The commonly used buffer structure of the swager cylinder is composed of a piston boss and a swager cylinder head groove. When the piston moves close to the swager cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

Answers to some questions about swager cylinder:

What is the smallest cylinder size?
The smallest shape cylinder I have ever seen is a hydraulic clamping cylinder in the machine tool industry. Outer diameter 24 mm, total length 23 mm, travel 4 mm. Weighs 0.05 kg. Maximum clamping force 3500 Newtons.

Is a hydraulic cylinder and a jack the same thing?
Strictly speaking, no. Although the hydraulic principle is used, and even some of the longer jacks are similar to the cylinder, the internal structure of the two is different. There is a check valve inside the jack. After the top lift, the check valve locks the hydraulic oil circuit, and the hydraulic oil only enters and does not exit after the check valve locks, and can be lowered to complete a reciprocating movement. The cylinder is usually connected to the distribution tube to control the movement, and works with a wide variety of distribution valves and distribution systems according to different needs. The jack only needs a simple check valve.